wear testing machine
英 [weə(r) ˈtestɪŋ məˈʃiːn]
美 [wer ˈtestɪŋ məˈʃiːn]
磨损试验机
双语例句
- Special friction and wear testing machine is the necessary equipment for researching the material's tribological properties in special working conditions.
特种摩擦磨损试验机是研究材料在特殊工况下摩擦学性能的必备装置。 - Development of WFM reciprocating friction wear testing machine
WFM型往复式摩擦磨损试验机的研制 - To research the tribological properties of pivot jewel bearing, a kind of high-speed friction and wear testing machine was developed.
为研究枢轴宝石轴承的摩擦磨损特性，设计并研制了一种高速摩擦磨损试验机。 - Design of Electro-hydraulic Proportional Loading System of Sliding Wear Testing Machine
摩擦磨损试验机用电液比例加载系统的性能分析设计 - This paper explain how to transform MM200 friction and wear tester to dynamical testing friction coefficient testing machine by loading sensor? PCI data acquisition card.
利用荷重传感器、PCI数据采集卡将MM200型摩擦磨损试验机改造成具有动态测试功能。 - The surface of pure chromium coatings and Cr/ Al_2O_3 composite coatings were observed and analyzed by scanning electron microscope ( SEM), hardness was evaluated by micro-hardness instrument, frictional wear was tested by friction wear testing machine.
制备了纯镀铬和Cr&Al2O3复合镀层，通过若干检测性实验，显微硬度测试，扫描电镜观察和摩擦磨损实验等来研究复合镀层的表面形貌和性能。 - The Optimization Design of the Chain Hinge Wear Testing Machine
链条铰链磨损试验机的优化设计 - Lastly, we study the frictional wear character of nitriding samples using friction wear testing machine WWM-1. As a result, the friction factors of the samples after nitriding fall down and the wear extent decrease comparing with that of original samples.
最后在WWM-1型万能摩擦磨损实验机上对氮化后的试样进行了摩擦磨损实验。 - The tribological properties of diamond films, graphite/ diamond composite films and cemented carbides were compared using a SRV wear testing machine with dry friction.
在干摩擦条件下利用SRV磨损试验机比较了在硬质合金基体上金刚石薄膜、石墨/金刚石复合膜以及硬质合金3种试样的摩擦学性能。 - How to refit live Abrasives wear into impact fatigue testing machine
如何将动载磨料磨损机改装成冲击疲劳试验机 - Design and study of three-body abrasive wear testing machine
三体磨料磨损试验机设计研究 - According to the chain hinge wear mechanism, this paper advances the design requirements of the high speed wear testing machine of chain.
根据链条铰链磨损机理，提出对链条快速磨损试验机的设计要求。 - Based on the above technology, we designed the end-face friction and wear testing machine CAT system based on the virtual instrumentation technology, at the same time, carried on analysis of the system.
在此基础上，设计了基于虚拟仪器技术的端面摩擦磨损试验机CAT系统，并对系统进行了分析。 - An electro-contact sliding friction wear testing machine has been developed to research on the friction wear properties of electro-contact lead materials.
为了研究电接触导线材料的摩擦磨损性能，自行研制了一台新型电接触滑动摩擦磨损试验机。 - Development and Application of Multifunctional Wear Testing Machine
多功能摩擦试验机的研制与应用 - Wear resistance of strengthened layers was evaluated on the two kinds of wear testing machine.
在两种磨损试验机上考察强化层的耐磨性。 - All experiments were investigated under dry sliding conditions using a pin-on-disc type wear testing machine.
摩擦磨损试验是在干摩擦条件下在销-盘磨损试验机上进行的。 - Development and application of model HQ-1 friction and wear testing machine
HQ-1型摩擦磨损试验机的研制与应用 - Development of Electro-Contact Sliding Friction and Wear Testing Machine
电接触滑动摩擦磨损试验机的研制 - The T-11 fricton and wear testing machine is employed to test the wear-resisting performance. It indicates that the specimen treated by oozing nanometer diamond technique can raise the wear-resistance.
利用T-11摩擦磨损试验机分别对其进行耐磨性能的测试后发现，通过纳米金刚石微粉热浸渗处理的试样比渗碳处理的试样耐磨性能提高得多。 - On a Falex friction and wear testing machine, a scuffing test for pin-on-disk combinations was carried out. And the influence of original roughness, load, speed, and pressure-velocity product etc on scuffing resistance was studied.
利用Falex多功能摩擦磨损试验机初步研究了销盘摩擦副接触表面初始粗糙度、载荷、速度，以及压强速度乘积对摩擦副抗胶合性能的影响。 - Research and Development of the Cooling System and Lubrication System of the High Temperature Sliding Wear and Thermo-Contact Fatigue Testing Machine
高温滑动磨损及热接触疲劳试验机冷却及润滑系统开发 - Microhardness was measured by means of a microhardness tester and abrasive wear resistance was tested by ML-100 wear testing machine.
利用显微硬度计、ML-100磨料磨损试验机考察非光滑表面的硬度及耐磨性。 - The influence of speed, temperature, load, oil etc on friction and wear characteristics of cylinder liner piston ring system in engine was studied on the cylinder liner piston ring testing machine.
利用缸套活塞环摩擦磨损试验台研究了速度、温度、载荷、供油等因素对缸套活塞环系统摩擦磨损特性的影响。 - Using MMW-1 omnipotent friction and wear testing machine, measuring wear data, observing the test site, the morphology of wear track surface, the composition of wear track surface, researching the wear characteristics of Laser Cladding layer.
试验采用MMW-1型万能摩擦磨损试验机，测量磨损量数据、观测试验现场、观察磨痕面的形貌、分析磨痕面的成分，研究激光熔覆层的摩擦磨损特性。 - The friction coefficient and wear resistance of these coatings were determined on the MMW-1 vertical omnipotence friction wear testing machine, under lubrication and dry friction conditions.
利用MMW-1型立式万能摩擦磨损试验机分别在流体润滑、边界润滑和干摩擦条件下，测试了涂层材料的摩擦系数，分析了涂层的耐磨性及磨损方式。 - Twenty premolars were randomly divided into 2 groups after regular cleaning. The experimental group was applied by FQ. The groups were placed in brush wear testing machine for 31000 times, and then scanned by electron microscope.
离体前磨牙20颗常规清洁后，随机分成2组，对照组无特殊处理；实验组用FQ光固化防龋涂料封闭，将两组样本置于牙刷磨耗试验机磨耗31000次后，进行扫描电镜观察。 - The hardness and wear resistance of the cladding layer were characterized by Micro hard-ness tester and wear testing machine, respectively, and the corrosion resistance was analyzed by polarization curves and immersion tests.
并利用显微硬度仪、摩擦磨损试验机对熔覆层进行硬度、耐磨性进行表征；利用极化曲线和浸泡试验对熔覆层的耐腐蚀性能分析。